How to Edit the key?

So, you have a locked keyswitch and you want to update it...


  • Go to "KEYS" panel. 
  • Press on lock icon below the keyswitch you want to edit.

Popup is shows up.

  • Press "Continue".

Now, a block of shortcuts to effects appear at the left side of the panel.

The effects are recorded in the Key will titled without sign "+".


Then Chose one of the following:


  • Delete Effects from Key  Version 1:
    • Press the Bin icon at the upper-right above the shortcuts block. 
    • Check effects to delete by clicking on shortcuts those equipped by check-boxes.
    • Press the Bin icon at the upper-right above the shortcuts block.
    • Press "Continue" in popup that appear.
    • Press on opened Lock icon below the Key.
  • Delete Effects from Key  Version 2:
    • Go to the effect modules by clicking on its shortcut in shortcuts' block or navigating by main menu.
    • At the top-left corner of panel of the each effect you want to delete click "RESET FX...".
    • Chose "Reset to preset values" option.
    • Go to "KEYS" section.
    • Press on opened Lock icon below the Key.


  • Change or add effects to Key:
    • Go to the effect modules by clicking on its shortcut in shortcuts' block or navigating by main menu.
    • Make changes to the effects.
    • Go to "KEYS" section.
    • Press on opened Lock icon below the Key.

*Please, note:

Every keyswitch that is in pressed state will apply its params values to the edited key in moment you lock it back.


Attention! 

Now this key is in pressed state. 

So if you does not need your changes still on, then press the key out.

FloppyTron Synthophone

Is this article helpful for you?